View Online

Fourways take off July 2019
Interbuild take off 19 Aug 2018
Cape Construction take off 14 September 18

Innovative design flooring solutions by Weber Saint-Gobain

Online since 3.11.2015 • Filed under Advertorial • From Issue 16 page(s) 101
Innovative design flooring solutions by Weber Saint-Gobain

Weber Saint-Gobain’s comprehensive range of highstrength base and top screed flooring products are designed especially for architects, main contractors, applicators and interior designers to achieve optimum speed, durability and smoothness of finish. The technically-advanced, high-performance products are the key to creating hard-wearing, seamless supersmooth floors to complement any environment. Design floor screeds are integral to the Weber flooring systems range, allowing architects, designers and specifiers to create new concepts in striking, long-lasting, durable and low-maintenance floor finishes in retail, commercial and residential developments. All Weber Saint-Gobain flooring products are designed to sustain high levels of traffic and provide optimal resistance to wear and abrasion. The range of cementbased, hard-wearing screeds can be applied as the final finish (overlay) or receive additional sealing coats or floor coverings. The Weber.floor Design is a self-levelling polymerbased coloured pumpable screed with rapid setting properties that completely sets within 24 hours. This through-coloured compound is available in six standard colours that can be mixed together to yield a total of 15 colour variants. Application depth can be between 3 and 10mm, and it can be polished to a smooth final finish. Weber.floor Granite is a similar pumpable screed with dark aggregate granules added to the compound, and polished to a high-gloss terrazzo finish. Considered to be a technical breakthrough, the company has recently launched a self-levelling underlay screed for use with vinyl, epoxy, tiles and carpet flooring overlays. The product, Weber.floor WB300, is not only self-levelling but also quick drying, independent of weather conditions and can be coated after just 12 hours. The introduction of this product will see productivity double in the flooring underlay sector.

Go to or call 08600 WEBER (93237)

Issue 16

Issue 16

November 2015

This article was featured on page 101 of
To Build Magazine Issue 16.

Share this

Power Purchase  Conference 2018 take off 23 Nov 18
 Affiliated Members AAAMSA - The Association of Architectural Aluminium Manufacturers of South Africa | Tel: 011 805 5002 CifA Institute for Landscape Architecture in South Africa KSA - Kitchen Specialist Association | Tel: 0827878806 SAIA